Karl Buchka
Active member
- Joined
- Mar 25, 2007
- Location
- Los Angeles
Red is the new purple. Just had the latest rev of the Stack circuit board delivered. It's got smattering of mods and simplifications. Fewer button inputs, larger mounting holes, two layer PCB instead of four, LDOs instead of switch mode regulators, software controllable CAN terminations, 5V level switching for the display, pinout that matches the stock Stack, improved microcontroller pin assignments, and I baked in the bodge wire changes I had to make on the previous version.
Oh, and the software has been updated so the CAN messaging, display page configs, and alarms are entirely defined with a text file that you load on to a micro SD card. No more recompiling to alter the setup.
Oh, and the software has been updated so the CAN messaging, display page configs, and alarms are entirely defined with a text file that you load on to a micro SD card. No more recompiling to alter the setup.