Pietercc
Active member
- Joined
- Apr 5, 2019
- Location
- Stockton,CA
I've got a set of v70r brakes to throw on my 760 (thanks Anthony), my only question is which brake line do I cap off, the upper or lower line going to the current caliper?
-
Hello Guest, welcome to the initial stages of our new platform!
You can find some additional information about where we are in the process of migrating the board and setting up our new software hereThank you for being a part of our community!
87 760 Brake upgrade
- Thread starter Pietercc
- Start date
rb92673
racecar
- Joined
- Jan 17, 2017
- Location
- San Clemente
I would guess it is the same as converting to 'jumbo brakes'. Pictures and write up here: https://www.brickboard.com/FAQ/700-900/Brakes.htm#UpgradingOlder7XXBrakestoLater9XXJumboBrakes
Pietercc
Active member
- Joined
- Apr 5, 2019
- Location
- Stockton,CA
Glad I asked and didn't try to figure it out myself. I would have never guessed plugging the master
Pietercc
Active member
- Joined
- Apr 5, 2019
- Location
- Stockton,CA
So I threw the brakes in, but I can tell that almost all the braking is being done by the rear brakes. Not sure if I may have done something wrong, or if it is something about the earlier master cylinder/proportioning valve, or if the calipers are 100% seized. Just looking for some ideas, as I will search for the issue tomorrow/Monday evening