Haha 10-4 buddy I've got a pretty good imagination.
-
Hello Guest, welcome to the initial stages of our new platform!
You can find some additional information about where we are in the process of migrating the board and setting up our new software hereThank you for being a part of our community!
'93 940 lh2.4 b230ft swap into '90 lh2.2 245
- Thread starter ThaSnyGuy
- Start date
shoestring
Well-known member
- Joined
- Jun 20, 2009
- Location
- Swampscott, 01907
Yeah but I mean REALLY factory. So much so that most of our friends are underwhelmed when we open the hood.
shoestring
Well-known member
- Joined
- Jun 20, 2009
- Location
- Swampscott, 01907
As requested.
2 old for this
Well-known member
- Joined
- Mar 12, 2018
it looks like you used a complete 7 series air cleaner. I just have the top part with just the bottom flange holding the filter. I need to revisit why I went that direction.
shoestring
Well-known member
- Joined
- Jun 20, 2009
- Location
- Swampscott, 01907
92 940. The base needed a bunch of modification, but we wanted to keep it.
Excellent
I would like to replicate this. Perhaps with a battery relocation and a electric power steering pump.
shoestring
Well-known member
- Joined
- Jun 20, 2009
- Location
- Swampscott, 01907
This car also has a do88 intercooler, just to point out that you're not limited to the factory stuff. Really, that's just a testament to how well the do88 is made.
2manyturbos
Moderator
- Joined
- Mar 8, 2003
- Location
- Monroe, OR USA
Very nicely executed. It looks factory, other than the IC hose/pipe clamps.
shoestring
Well-known member
- Joined
- Jun 20, 2009
- Location
- Swampscott, 01907
Thanks! 100% what we were going for. The 16T I got from you maybe a year ago or so is for this car.
So it's a do88 ic for a 940 I assume? With the lower enter and exit?
You are running a 240 radiator correct?
shoestring
Well-known member
- Joined
- Jun 20, 2009
- Location
- Swampscott, 01907
Correct. 940 w/AC.
shoestring
Well-known member
- Joined
- Jun 20, 2009
- Location
- Swampscott, 01907
Yes.
10-4 thank you
Update, I swapped to a b cam that I had in a different engine and corrected valve lash. Intake manifold is done and waiting for exhaust manifold gaskets. I have ordered materials to move the battery to the rear so I might have room under the hood for electric power steering one day.