• Hello Guest, welcome to the initial stages of our new platform!
    You can find some additional information about where we are in the process of migrating the board and setting up our new software here

    Thank you for being a part of our community!

Identify B21 with flat top pistons for use in B20?

Often these pistons have as much as 0.1mm wear in used engines.
I would not recommend using pistons from a used block as it is a gamble.

The bores are often fine though, 0,01-0,02mm of wear in a well used engine is no exception.
 
You must log in or register to reply here.
Back
Top