Hi, it would help if you posted a pic. The sheet metal piece that goes across the front which holds the lights, radiator, horn, and condenser is called the 'core support'. It is one piece. You can get one from the junk yard. The ends where the core support are connected to the front fenders is spot welded in one place on each side, and needs to be drilled out, then riveted to the fenders after installation (underneath the parking light), otherwise it is a bolt-in piece like each fender. If the bumper was pushed in and the shocks collapsed then you may be looking at frame damage where the bumper shock bolt hole is located. Take it all apart and look below hte battery and behind the right headlight to see if the inner fenderwalls are damaged. If not you can just bolt the new core support in place an re-assemble everything