Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
Hello Guest, welcome to the initial stages of our new platform! You can find some additional information about where we are in the process of migrating the board and setting up our new software here
I read an old post saying you build whiteblock adapter plates, still making these? I'm down in salem and really need a answer to my project. (971) 218-7616 -Josh please give me a call when you get a chance
I read you have built B20 engines using a roller camshaft
Was it the AGAP -cam ?
I am also considering to use such a cam, but would like to know which experience others have using this type of cam.
As far as I heard the lifter bores need to be sleeved to avoid lifter wear, and the axial cam travel needs to be completely eliminated using a bearing.
Any tips/tricks, experiences would be greatly appreciated
Jonathan, I'm having a problem with RSI pistons I need help with. Cannot reach anyone at R-Sport. My email is paulmcurran@gmail.com, my phone is 413-478-1275. Please contact. Thanks, Paul
Hi, I saw that you are working on a round tooth adj. cam gear? If so, any idea when they will be available? I was just about to buy a square tooth one & change all the gears, but I'd rather keep the round setup. Let me know. Thanks, Paul
I did a search and saw you had some TPS adapters. Do you have one that I can put a LH 2.4.2 (potentiometer) TPS on a 2.2 TPS (WOT and idle only) throttle body? Thanks.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.