home register FAQ memberlist calendar

Go Back   Turbobricks Forums > Search Forums

Showing results 1 to 50 of 300
Search took 0.04 seconds.
Search: Posts Made By: 90volvo
Forum: performance & modifications 01-15-2021, 07:08 PM
Replies: 17
Views: 2,768
Posted By 90volvo
If you have a lathe you can buy the 63.4 all day...

If you have a lathe you can buy the 63.4 all day then punch them to 65mm. Then get a hubcentric ring to adapt from 63.4 to 65. Kinda a pain but works.
Forum: maintenance & nonperformance 01-15-2021, 04:11 PM
Replies: 9
Views: 285
Posted By 90volvo
I just run one I picked up from oriellys. Been...

I just run one I picked up from oriellys. Been about a year ago but on the road I had a fuel line pop on the fuel rail. It ignited the and I had a huge engine fire. Thank goodness I had a F.E. in my...
Forum: performance & modifications 01-11-2021, 03:53 AM
Replies: 3
Views: 418
Posted By 90volvo
You need a wheel around et35-45. With spacers you...

You need a wheel around et35-45. With spacers you want to end up with et10 for best looks. Im just bought some spacers 25mm and 32mm with et43 wheels. This is with 17 inch wheel, Ill let you know how...
Forum: maintenance & nonperformance 01-11-2021, 02:24 AM
Replies: 41
Views: 1,190
Posted By 90volvo
the research I have done, I found nothing but...

the research I have done, I found nothing but positive reviews about amsoil. I have a rebuilt engine, so running their breakin oil. Then Im gonna switch to 5-40 weight. Their oil has alot of zinc in...
Forum: performance & modifications 12-26-2020, 12:35 PM
Replies: 6
Views: 923
Posted By 90volvo
I installed AEM pump in my tank and deleted the...

I installed AEM pump in my tank and deleted the main pump. It’s easy to do.
Forum: performance & modifications 12-12-2020, 07:32 PM
Replies: 5
Views: 1,465
Posted By 90volvo
Wanted to let you know that my low oil pressure...

Wanted to let you know that my low oil pressure was result of a loose fitting. It’s fixed and expect oil pressure to be better. Will let you know on my next outing.
Forum: performance & modifications 12-11-2020, 01:03 PM
Replies: 7
Views: 990
Posted By 90volvo
I bought mine off of ebay think it was like...

I bought mine off of ebay think it was like 225.00. Which is probably about the same price as klracing intercooler. Klracing is over seas and youll have to wait about a week to recieve it which isnt...
Forum: performance & modifications 12-11-2020, 12:30 PM
Replies: 7
Views: 990
Posted By 90volvo
have you thought about a NPR intercooler. They...

have you thought about a NPR intercooler. They fit pretty easy, funny they look just like that DO88 intercooler. Probably half the cost. But dont know if one is better than the other. I ran a NPR...
Forum: performance & modifications 12-11-2020, 12:26 PM
Replies: 8
Views: 1,466
Posted By 90volvo
https://dsportmag.com/the-tech/twin-scroll-vs-sing...

https://dsportmag.com/the-tech/twin-scroll-vs-single-scroll-turbo-test-the-great-divide/
Forum: performance & modifications 12-11-2020, 12:07 PM
Replies: 8
Views: 1,150
Posted By 90volvo
[QUOTE=Harlard;6136195]Seriously. You spend way...

[QUOTE=Harlard;6136195]Seriously. You spend way more than a stock cast manifold end end up making the same power with less reliability.

The stock manifold is good til 300hp. May 350? I would like...
Forum: maintenance & nonperformance 12-09-2020, 08:52 PM
Replies: 21
Views: 1,180
Posted By 90volvo
I custom built cup holder that sets over the...

I custom built cup holder that sets over the parking brake.
Forum: performance & modifications 12-08-2020, 10:07 PM
Replies: 8
Views: 1,150
Posted By 90volvo
havent spent anything. LOL. Just an idea, is all....

havent spent anything. LOL. Just an idea, is all. Thanks for input.
Forum: performance & modifications 12-08-2020, 02:40 PM
Replies: 8
Views: 1,150
Posted By 90volvo
Yeh I have a eBay header laying around. I might...

Yeh I have a eBay header laying around. I might buy the adapter and try it out. But I have a custom header on car for now. Might put it in my sons 240.
Forum: performance & modifications 12-08-2020, 04:28 AM
Replies: 5
Views: 1,465
Posted By 90volvo
Thought I would let you know that when my oil...

Thought I would let you know that when my oil cooler thermostat opens my oil pressure dropped to 15 at a hot idle but goes up with rpm. Have like 40lbs at 3000rpm. I’m running 10an hoses to and from...
Forum: performance & modifications 12-08-2020, 12:09 AM
Replies: 8
Views: 1,150
Posted By 90volvo
ebay header adapters?

We all know that all the US headers for 240-740-940 are backwards and needs to be flipped. Most cut the flange off and flips it over 180 degrees. Well I ran across a guy that was selling Ford 2.3...
Forum: maintenance & nonperformance 12-04-2020, 06:52 PM
Replies: 28
Views: 2,252
Posted By 90volvo
Id price a new one. Just me. ;-)

Id price a new one. Just me. ;-)
Forum: performance & modifications 12-03-2020, 08:23 PM
Replies: 2
Views: 816
Posted By 90volvo
I dont see why there would be a difference. Other...

I dont see why there would be a difference. Other than things like old style manifold vs new style. But all and all I buy 740 manifolds and put them on 240s all the time.
Forum: performance & modifications 12-03-2020, 01:30 AM
Replies: 6
Views: 994
Posted By 90volvo
I could go straight down off my turbo to get past...

I could go straight down off my turbo to get past the header but then I wouldnt have much of an angle for the drain. When I had engine apart I should of welded a bung in the front or at least half...
Forum: performance & modifications 12-02-2020, 07:31 PM
Replies: 6
Views: 994
Posted By 90volvo
Here’s some pics ...

Here’s some pics
https://imgur.com/gallery/22pcl6Y?s=sms
Forum: performance & modifications 12-02-2020, 05:50 PM
Replies: 6
Views: 994
Posted By 90volvo
Yeh, I know thats not going to work. I will try...

Yeh, I know thats not going to work. I will try and get some pics. I have hydraulic return hose wrapped in fiberglass at the moment but know thats no a long term answer and probably not short term...
Forum: performance & modifications 12-02-2020, 03:17 PM
Replies: 6
Views: 994
Posted By 90volvo
Turbo/header drain

I have basically everything lined out on new engine and turbo etc. One problem I do have is my oil drain line touches my header which is wrapped in ex. wrap. Doesnt take long for it to start smoking....
Forum: performance & modifications 12-02-2020, 02:34 PM
Replies: 7
Views: 1,037
Posted By 90volvo
Im going to buy a flexible stainless steel line...

Im going to buy a flexible stainless steel line used for dodge cummins turbo. No rubber at all stainless steel. But my engine has header and the drain goes down threw the header and touches the pipes...
Forum: aftermarket engine management 12-02-2020, 12:41 AM
Replies: 10
Views: 1,223
Posted By 90volvo
Figured my problem out with they help of others....

Figured my problem out with they help of others. The kpa were running like 300 so it was way off. Traced it down to the Map sensor, it was either bad or wrong one got put in right box. Anyways now I...
Forum: performance & modifications 11-29-2020, 09:00 PM
Replies: 5
Views: 1,465
Posted By 90volvo
Im not an expert, I would run the high pressure...

Im not an expert, I would run the high pressure spring. Running that much stuff; I was concerned about pressure but decided to just leave the melling spring installed. I have a big oil cooler and new...
Forum: performance & modifications 11-29-2020, 12:32 PM
Replies: 32
Views: 3,979
Posted By 90volvo
I would start reading the above post. Alot of...

I would start reading the above post. Alot of good info; There is alot of people on here that know their stuff. Im sure some will tune in but its best if you learn and put together your package to...
Forum: aftermarket engine management 11-26-2020, 08:09 PM
Replies: 10
Views: 1,223
Posted By 90volvo
So the Megasquirt said 6.8 on required fuel. But...

So the Megasquirt said 6.8 on required fuel. But it wouldnt hardly run at that was super rich. I started leaning it out and finally got it to run smooth but was all the way down to 2.5? So thought...
Forum: aftermarket engine management 11-25-2020, 11:08 PM
Replies: 10
Views: 1,223
Posted By 90volvo
Will do thanks

Will do thanks
Forum: maintenance & nonperformance 11-25-2020, 10:52 PM
Replies: 9
Views: 832
Posted By 90volvo
I believe thats right on? But Im sure some...

I believe thats right on? But Im sure some experts will tune in .
Forum: aftermarket engine management 11-25-2020, 10:48 PM
Replies: 10
Views: 1,223
Posted By 90volvo
Thanks for advice. Its about 40 degrees out. I...

Thanks for advice. Its about 40 degrees out. I forgot about E85 not liking the cold.
Forum: aftermarket engine management 11-25-2020, 10:21 PM
Replies: 10
Views: 1,223
Posted By 90volvo
ms required fuel

Ok, I have installed my new engine. Before I was running megasquirt with 650cc injectors on E85. My required fuel was at 13.5, I know my injectors were to small. My new engine I installed 1000cc...
Forum: performance & modifications 11-24-2020, 07:50 PM
Replies: 8
Views: 1,311
Posted By 90volvo
how far is your Mass Air Flow meter from the...

how far is your Mass Air Flow meter from the turbo. I had similar experience and when I moved the AMM away from the turbo it fixed the problem.
Forum: projects & restorations 11-23-2020, 04:23 AM
Replies: 10
Views: 3,291
Posted By 90volvo
Rsi stage 3.

Rsi stage 3.
Forum: maintenance & nonperformance 11-22-2020, 02:53 PM
Replies: 15
Views: 1,600
Posted By 90volvo
Do you need a balancer. You pay shipping and Ill...

Do you need a balancer. You pay shipping and Ill give you one.
Forum: projects & restorations 11-22-2020, 11:27 AM
Replies: 10
Views: 3,291
Posted By 90volvo
Also pic of painted engine department. I used...

Also pic of painted engine department. I used rustoleum oil base paint, I added some hardner. It turned out really well.
Forum: performance & modifications 11-22-2020, 01:10 AM
Replies: 18
Views: 2,160
Posted By 90volvo
Weld some flat stock to the crushed are with a...

Weld some flat stock to the crushed are with a nut welded to the flat stock? Use the damage for excuse to beef up the frame rail? That’s the way I’d go about it. Picture of dame would be nice.
Forum: projects & restorations 11-22-2020, 01:00 AM
Replies: 10
Views: 3,291
Posted By 90volvo
https://imgur.com/gallery/lKAdjTi?s=sms New...

https://imgur.com/gallery/lKAdjTi?s=sms

New casting head done by culberro. Larger valves and all new hardware with stage 3 camshaft.
Forum: performance & modifications 11-21-2020, 07:39 PM
Replies: 2
Views: 1,133
Posted By 90volvo
Custom Redblock parts

Ran across a place on facebook that makes custom intake and ex. manifold. Viking Fabrications only downer is they are in England but will ship to US. I paid down for a custom intake they offer out of...
Forum: projects & restorations 11-21-2020, 01:20 AM
Replies: 10
Views: 3,291
Posted By 90volvo
http://https://imgur.com/gallery/U44P2c7?http://ht...

http://https://imgur.com/gallery/U44P2c7?http://https://imgur.com/gallery/U44P2c7?s=sms
New short block that I rebuilt. Left the block standard. Put new bearings-rings- oil pump. The block had 2.5...
Forum: projects & restorations 11-20-2020, 11:29 PM
Replies: 10
Views: 3,291
Posted By 90volvo
Here’s pics of aftermath. Hole in side of block....

Here’s pics of aftermath. Hole in side of block. Wire harness melted.
https://imgur.com/gallery/YBBs9hG?s=sms
Forum: maintenance & nonperformance 11-20-2020, 08:02 PM
Replies: 11
Views: 1,469
Posted By 90volvo
pull plug wire off one at a time. When you find...

pull plug wire off one at a time. When you find the one that doesnt change anything. Thats the bad cylinder but, diffently sounds like something foreign in cylinder. I wouldnt run it anymore than you...
Forum: performance & modifications 11-20-2020, 03:20 PM
Replies: 10
Views: 1,760
Posted By 90volvo
There is a 15g for sale on here. I loved the 15g...

There is a 15g for sale on here. I loved the 15g but got greedy and went to the 19T. They are easy to rebuild, plenty of youtube vids to go by if youve never done one before.
Forum: performance & modifications 11-20-2020, 03:10 PM
Replies: 9
Views: 1,602
Posted By 90volvo
Thanks for the info guys. Man I wish I did this...

Thanks for the info guys. Man I wish I did this few years back instead of dinkin around with M47s and now AW71's. Oh well Thanks going to get adapter and TC adapter ordered. Then Ill decide on which...
Forum: performance & modifications 11-20-2020, 01:53 AM
Replies: 9
Views: 1,602
Posted By 90volvo
So what adapters needed to run 200r4? You have a...

So what adapters needed to run 200r4? You have a good source?
Forum: maintenance & nonperformance 11-20-2020, 12:20 AM
Replies: 14
Views: 2,769
Posted By 90volvo
Here’s link of wire job. ...

Here’s link of wire job.
https://imgur.com/gallery/koEtIWD?s=sms
Forum: performance & modifications 11-19-2020, 08:11 PM
Replies: 9
Views: 1,602
Posted By 90volvo
Thanks for the link. Will diffently check into it.

Thanks for the link. Will diffently check into it.
Forum: performance & modifications 11-19-2020, 02:57 PM
Replies: 9
Views: 1,602
Posted By 90volvo
High Hp auto options

With my new motor I know my AW71 wont live long. So I want to start planning and buying stuff I need. Car is 90 240 and I want to keep it automatic. Who making adapters for Gm trans? What GM trans...
Forum: performance & modifications 11-17-2020, 07:20 PM
Replies: 29
Views: 5,344
Posted By 90volvo
probably depends on your budget. I ran 19t for...

probably depends on your budget. I ran 19t for quite a while and liked it. But with my new motor Im running a Gtx3067r on a header. I wanted to run a Evo turbo but never got around to the manifold...
Forum: performance & modifications 11-17-2020, 12:37 PM
Replies: 12
Views: 2,811
Posted By 90volvo
Man that is awlful big, you peak torque is gonna...

Man that is awlful big, you peak torque is gonna be in 6000+. Heres a link for you. I would invest in something usable. GTX3067r
http://forums.turbobricks.com/showthread.php?t=346671
Forum: maintenance & nonperformance 11-16-2020, 07:11 AM
Replies: 1
Views: 1,038
Posted By 90volvo
trans cooler ??????????

Im in process of hooking up big trans cooler on my 240 with AW71 trans. Does line routing matter? Should the rear coolant line be at the bottom of the cooler or the top of the cooler? Seem like I...
Forum: maintenance & nonperformance 11-15-2020, 09:51 AM
Replies: 14
Views: 2,769
Posted By 90volvo
I recently rewired my 240. But I wired it for...

I recently rewired my 240. But I wired it for megasquirt. Kept wiring in usual spots but I covered it all with some nice red and black wire loom. I was gonna hide it all but decided not to cause I...
Showing results 1 to 50 of 300

 
Forum Jump

All times are GMT -4. The time now is 10:03 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.