home register FAQ memberlist calendar

Go Back   Turbobricks Forums > Search Forums

Showing results 1 to 50 of 300
Search took 0.05 seconds.
Search: Posts Made By: hiperfauto
Forum: maintenance & nonperformance 08-09-2020, 04:35 PM
Replies: 17
Views: 460
Posted By hiperfauto
While those nuts may fit the studs for the...

While those nuts may fit the studs for the downpipe these are the correct ones. The difference in price is astounding.

https://www.fcpeuro.com/products/volvo-lock-nut-985868
Forum: maintenance & nonperformance 08-09-2020, 04:10 PM
Replies: 26
Views: 541
Posted By hiperfauto
He tried starting it in gear with the clutch...

He tried starting it in gear with the clutch pedal depressed already. See post #5.

I don't think the TO bearing is in backwards. OP says the clutch pedal feels normal.
Forum: maintenance & nonperformance 08-08-2020, 06:37 PM
Replies: 26
Views: 541
Posted By hiperfauto
I had to go and see if it was physically possible...

I had to go and see if it was physically possible to install the TO bearing backwards and it is. It places the fork close to the front of the window in the bell housing so that the cable wont be able...
Forum: maintenance & nonperformance 08-08-2020, 04:28 PM
Replies: 26
Views: 541
Posted By hiperfauto
I don't see how you could have put the TO bearing...

I don't see how you could have put the TO bearing on backwards.

http://betaimages.imcparts.net/webapp/wcs/stores/servlet/imc/images/full/1220955_1.jpg
Forum: maintenance & nonperformance 08-07-2020, 11:27 PM
Replies: 26
Views: 541
Posted By hiperfauto
If the pressure plate was dropped there's a...

If the pressure plate was dropped there's a chance that one or more of the 3 thin spring plates was bent. They're supposed to retract the pressure plate when the pedal is depressed. The result is...
Forum: maintenance & nonperformance 08-07-2020, 01:16 PM
Replies: 17
Views: 460
Posted By hiperfauto
Have you checked the nut on the underside? It may...

Have you checked the nut on the underside? It may just be loose.

The clamp goes on the down pipe where it passes close to the bell housing. It attaches to one of the bell housing bolts with a...
Forum: performance & modifications 08-06-2020, 03:52 PM
Replies: 24
Views: 959
Posted By hiperfauto
I'm pretty sure the seats were induction hardened...

I'm pretty sure the seats were induction hardened from the factory. I've seen lots of '75 heads with sunk valves and no sign of a replaceable seat.
Forum: maintenance & nonperformance 08-05-2020, 10:02 PM
Replies: 2
Views: 212
Posted By hiperfauto
http://hiperformanceautoservice.com/images/OHCVolv...

http://hiperformanceautoservice.com/images/OHCVolvoTDC.jpg
Forum: maintenance & nonperformance 08-05-2020, 12:57 PM
Replies: 5
Views: 418
Posted By hiperfauto
The parts catalog doesn't have a very good...

The parts catalog doesn't have a very good drawing of the IAC hoses for B204GT/FT. They're #14 & 15 in this pic.

14 is part #3514474 and is still available from Volvo. 15 is part #3514475 and is...
Forum: performance & modifications 08-04-2020, 06:14 PM
Replies: 12
Views: 431
Posted By hiperfauto
^ This. They do! ...

^ This.



They do!

http://forums.turbobricks.com/showthread.php?t=340946&highlight=740+center+support

There's also this option.
Forum: performance & modifications 08-04-2020, 05:13 PM
Replies: 12
Views: 431
Posted By hiperfauto
There is a flange available for M47 that uses a...

There is a flange available for M47 that uses a traditional U-joint but it only came on diesel powered cars.

https://www.volvowholesalepartsdirect.com/images/parts/volvo/fullsize/GR-65710.jpg
...
Forum: performance & modifications 08-04-2020, 05:07 PM
Replies: 10
Views: 606
Posted By hiperfauto
We have JC rebuild the throttle bodies and...

We have JC rebuild the throttle bodies and assemble them ourselves with genuine SU repair kits. There are 5 different throttle bodies for B18's, 3 for 2 bolt air filters and 2 for 3 bolt air filters....
Forum: maintenance & nonperformance 08-04-2020, 02:01 PM
Replies: 27
Views: 990
Posted By hiperfauto
I'm not convinced that heat is the cause of the...

I'm not convinced that heat is the cause of the failure. On several cars the hose between the pump and filter sprang a leak and it's not close to any heat source.

Belmetric has the 2240 hose as...
Forum: maintenance & nonperformance 08-04-2020, 01:40 AM
Replies: 5
Views: 418
Posted By hiperfauto
It would help to know what year and which engine...

It would help to know what year and which engine your car has. There are 8 valve (B200T) and a 16 valve (B204FT/GT) turbo 2.0 engines.

Is the T shaped metal thing the IAC valve?
...
Forum: performance & modifications 08-04-2020, 12:42 AM
Replies: 12
Views: 431
Posted By hiperfauto
I have a 240 M47 shift cage I can measure but you...

I have a 240 M47 shift cage I can measure but you can probably trade your 740 cage for a 240 one since 740's with M47 are much more rare.

If the 740 drive shaft front half is long enough I think...
Forum: maintenance & nonperformance 08-03-2020, 08:06 PM
Replies: 23
Views: 603
Posted By hiperfauto
If you indeed have both fuel and spark, check the...

If you indeed have both fuel and spark, check the camshaft sprocket locating pin. They're known to shear. IPD sells a solid pin to replace the original thin wall hollow pin.



I've said before...
Forum: maintenance & nonperformance 08-03-2020, 04:14 PM
Replies: 32
Views: 2,224
Posted By hiperfauto
The stud with nut that's been brazed at one point...

The stud with nut that's been brazed at one point are the original parts for the 240 rear trailing arm bushing tool. It's easily damaged if you're not careful and was replaced with a regular bolt.
...
Forum: projects & restorations 08-03-2020, 01:05 PM
Replies: 415
Views: 211,743
Posted By hiperfauto
When I bent an axle tube on the quick change in...

When I bent an axle tube on the quick change in my race car the replcement tube must have warped a little when they welded on the caliper and shock brackets because they laid a couple of vertical...
Forum: showroom 08-03-2020, 11:57 AM
Replies: 2
Views: 234
Posted By hiperfauto
Here are the installation instructions. You have...

Here are the installation instructions. You have your choice of how to wire them.

http://www.240.se/litteratur/3-35-6a.pdf
Forum: maintenance & nonperformance 08-01-2020, 06:31 PM
Replies: 27
Views: 990
Posted By hiperfauto
We're using this stuff. ...

We're using this stuff.

https://www.belmetric.com/smooth-high-pressure-oem-c-14_139/rh75hp-smooth-high-pressure-75mm-p-958.html
Forum: maintenance & nonperformance 08-01-2020, 04:50 PM
Replies: 27
Views: 990
Posted By hiperfauto
We've been using CRP hose 'cause that's what...

We've been using CRP hose 'cause that's what Worldpac sells but it's been developing deeps cracks in the rubber and some leaks. We've had to call customers back in to have it replaced before it...
Forum: maintenance & nonperformance 07-30-2020, 04:21 PM
Replies: 7
Views: 495
Posted By hiperfauto
According to the parts catalog the change...

According to the parts catalog the change occurred early in the '81 model production.
Forum: performance & modifications 07-29-2020, 04:09 PM
Replies: 17
Views: 970
Posted By hiperfauto
I usually cut them in half with the IPD springs...

I usually cut them in half with the IPD springs that lower the car ~1". You may need to cut more or use a short poly bump stop if you're lower than that.
Forum: performance & modifications 07-29-2020, 01:38 PM
Replies: 12
Views: 644
Posted By hiperfauto
You need to change the setting in your user...

You need to change the setting in your user control panel to save sent messages.
Forum: performance & modifications 07-29-2020, 01:16 PM
Replies: 12
Views: 644
Posted By hiperfauto
Verify engine temp with a non contact IR...

Verify engine temp with a non contact IR thermometer.

I seriously doubt the Auto meter gauge will read properly with a Volvo sender.

An adapter is available so you can use the Auto Meter...
Forum: performance & modifications 07-29-2020, 01:10 AM
Replies: 17
Views: 970
Posted By hiperfauto
You're supposed to cut the bump stops down when...

You're supposed to cut the bump stops down when installing lowering springs.
Forum: maintenance & nonperformance 07-28-2020, 09:39 PM
Replies: 7
Views: 507
Posted By hiperfauto
You need to use a piece of rope (or leather cord)...

You need to use a piece of rope (or leather cord) to open the slot in the rubber so that you can get the molding started then use the rope to pull it in.
...
Forum: performance & modifications 07-27-2020, 07:33 PM
Replies: 20
Views: 982
Posted By hiperfauto
That looks like the Volvo kit. It comes with a...

That looks like the Volvo kit. It comes with a thin Elring head gasket and the rest of the parts are in Volvo bags. The head gasket thickness info in the pic I posted above is incorrect. B20B and...
Forum: maintenance & nonperformance 07-27-2020, 02:50 PM
Replies: 6
Views: 607
Posted By hiperfauto
Did you replace the flex hoses? Are the rear...

Did you replace the flex hoses?

Are the rear brakes adjusted properly?

This may sound dumb but did you put the calipers on upside down? I only ask because there have been 2 threads recently...
Forum: performance & modifications 07-27-2020, 02:39 PM
Replies: 20
Views: 982
Posted By hiperfauto
Only the A and F heads are the same thickness. ...

Only the A and F heads are the same thickness.

http://hiperformanceautoservice.com/images/B20EngineSpecs2.jpg

The B head gasket doesn't have the bumps in the fire ring for the larger E/F...
Forum: performance & modifications 07-26-2020, 06:55 PM
Replies: 17
Views: 970
Posted By hiperfauto
MikeJr. has a lightly used set of 5½" wheels with...

MikeJr. has a lightly used set of 5½" wheels with 195 tires that use the stock hub caps for sale.

http://forums.turbobricks.com/showthread.php?t=345847
Forum: maintenance & nonperformance 07-26-2020, 05:02 PM
Replies: 21
Views: 1,042
Posted By hiperfauto
It's not a good idea to mix and match metal...

It's not a good idea to mix and match metal timing gears. Some have different numbers of teeth and there may be other differences such as the helix angle. The fiber cam gears can be replaced without...
Forum: maintenance & nonperformance 07-25-2020, 05:09 PM
Replies: 9
Views: 626
Posted By hiperfauto
The anti-rattle clip is on backwards. Flip it...

The anti-rattle clip is on backwards. Flip it over.
Forum: maintenance & nonperformance 07-25-2020, 12:36 PM
Replies: 32
Views: 2,224
Posted By hiperfauto
http://hiperformanceautoservice.com/images/Carrier...

http://hiperformanceautoservice.com/images/CarrierBearingPuller.jpg

https://d1f7geppf3ca7.cloudfront.net/origin/187468/5078_+_5079.png
Forum: maintenance & nonperformance 07-24-2020, 08:29 PM
Replies: 31
Views: 2,567
Posted By hiperfauto
I'd check with IPD first to make sure they...

I'd check with IPD first to make sure they haven't changed suppliers since that pic was taken. Your bushing is made by MTC and IPD is using the same part number (VR221) but the pic looks like a Meyle...
Forum: maintenance & nonperformance 07-24-2020, 08:11 PM
Replies: 31
Views: 2,567
Posted By hiperfauto
The bushings that IPD sells have a thicker shell...

The bushings that IPD sells have a thicker shell but it will still bend if your pressing on the outside of the flange and the bushing is a tight fit.
...
Forum: maintenance & nonperformance 07-24-2020, 02:30 PM
Replies: 32
Views: 2,224
Posted By hiperfauto
The cages are made of wire mesh with metal peg...

The cages are made of wire mesh with metal peg board on the inside. The pictures are from a 1976 Special Tools catalog.
Forum: maintenance & nonperformance 07-24-2020, 01:34 PM
Replies: 31
Views: 2,567
Posted By hiperfauto
The notch in the upper ball joint should be...

The notch in the upper ball joint should be facing out.

The notch with the blue dot on the lower control arm bushing should be 90° to the ball joint plus or minus 5°.
Forum: maintenance & nonperformance 07-24-2020, 01:29 PM
Replies: 21
Views: 1,042
Posted By hiperfauto
It's not necessary to have the installation tools...

It's not necessary to have the installation tools but it sure makes the job easier. The crank gear requires a lot of force to remove/install and as John said, you risk knocking out the cam plug if...
Forum: maintenance & nonperformance 07-24-2020, 11:51 AM
Replies: 31
Views: 2,567
Posted By hiperfauto
If it has the large ball joint it's the correct...

If it has the large ball joint it's the correct arm. Also, the upper arms are the same left and right so you can use either one.
Forum: maintenance & nonperformance 07-23-2020, 08:28 PM
Replies: 21
Views: 1,042
Posted By hiperfauto
A ½" air gun should blast the nut off providing...

A ½" air gun should blast the nut off providing you have enough CFM.

If not, mesh the gears and jam a rag or paper towel into them to lock the gears.
Forum: maintenance & nonperformance 07-23-2020, 08:22 PM
Replies: 31
Views: 2,567
Posted By hiperfauto
It depends on the whether or not the '69 upper...

It depends on the whether or not the '69 upper arm has the big or small ball joint. The change was in the middle of the year so it could have either one.
...
Forum: performance & modifications 07-21-2020, 04:11 PM
Replies: 20
Views: 1,116
Posted By hiperfauto
There are subtle differences between the hubs and...

There are subtle differences between the hubs and apparently the late hub can be used on all years so Momo only sells that one. It's nice that Luisi is making all three variations of the hubs still....
Forum: performance & modifications 07-21-2020, 03:47 PM
Replies: 20
Views: 1,116
Posted By hiperfauto
Shipping from the Netherlands won't be cheap. It...

Shipping from the Netherlands won't be cheap. It looks like they're using Luisi's part numbers with a generic picture.

The late 140/early 240 Luisi hub is part number 7705 but they say it only...
Forum: maintenance & nonperformance 07-21-2020, 12:00 PM
Replies: 5
Views: 493
Posted By hiperfauto
The spacer is slightly thicker than the retaining...

The spacer is slightly thicker than the retaining plate. It sets the end play once the timing gear is tightened down.

Do you have the timing gear installed?
Forum: maintenance & nonperformance 07-20-2020, 10:25 PM
Replies: 32
Views: 2,224
Posted By hiperfauto
http://hiperformanceautoservice.com/images/ToolCab...

http://hiperformanceautoservice.com/images/ToolCabinet1.jpg

http://hiperformanceautoservice.com/images/ToolCabinet2.jpg
Forum: maintenance & nonperformance 07-20-2020, 09:39 PM
Replies: 32
Views: 2,224
Posted By hiperfauto
Sorry, I couldn't find anything for 999 5215. ...

Sorry, I couldn't find anything for 999 5215.

999 5215 - ?
999 5534 - engine lifting fork
999 5744 - adapter ring used with counterhold 999 5652 to remove viscous coupler


SVO 2305 - fitting...
Forum: performance & modifications 07-20-2020, 02:57 PM
Replies: 20
Views: 1,116
Posted By hiperfauto
Yeah, it should work fine. The turn signals...

Yeah, it should work fine.

The turn signals may not cancel in the same position left and right but they will cancel.

One member didn't like the way the turn signal would cancel with the...
Forum: performance & modifications 07-20-2020, 01:36 PM
Replies: 20
Views: 1,116
Posted By hiperfauto
Damn that NRG adapter is expensive not to mention...

Damn that NRG adapter is expensive not to mention you need to buy a quick release adapter to use it. It's not listed in their application chart so how would you even know they made one for Volvo?
...
Forum: maintenance & nonperformance 07-20-2020, 01:28 PM
Replies: 12
Views: 588
Posted By hiperfauto
It's probably an old sensor and the diaphragm has...

It's probably an old sensor and the diaphragm has ruptured. Remember Murpy's law, "If anything can go wrong, it will".

Don't use teflon tape on a sensor that's needs a ground. Use liquid teflon...
Showing results 1 to 50 of 300

 
Forum Jump

All times are GMT -4. The time now is 03:33 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2020, vBulletin Solutions Inc.