View Single Post
Old 04-17-2020, 03:07 PM   #4
volvbro
Newbie
 
Join Date: Nov 2016
Location: Massachusetts
Default

Updated first post with pictures.

This past Sunday I went out and worked on the car, buttoning odds and ends up to get the car ready to roll under its own power. I hooked up the propeller shaft, replaced the transmission mount, got the motor mounts in place and bolted up, filled the motor with coolant, and put some interior pieces back together. Unfortunately, the main water pipe coming off the water pump to the heater core sprung a pinhole leak just below the third runner on the exhaust manifold. All that's left is fix that leak, source a MAF, source a clutch return spring, and fill the trans with transmission fluid.

I bought 75-90 gear oil, is that fine? I just want to make sure I'm filling the tranny with the correct fluid.
volvbro is offline   Reply With Quote