shaved240
Active member
- Joined
- Jun 6, 2003
- Location
- California
this flywheel?
http://bakaxel.se/koppling/svanghjul/svanghjul-volvo-rodmotor-8-bult-startkrans.html
and you're using a standard 765 e34 M5 pressure plate and 6 puck clutch? So besides turning down the outside of the clutch the pressure plate just bolts up to that right?
I'm not too keen on my 9" dog dish flywheel w/ standard 740 turbo pressure plate and 6 puck. Doesn't hold all that much torque and this seems like a good solution.
Sorry for the many questions, but can a 765 pressure plate be fitted to a redblock flat flywheel aka 8.5" flywheel?
http://bakaxel.se/koppling/svanghjul/svanghjul-volvo-rodmotor-8-bult-startkrans.html
and you're using a standard 765 e34 M5 pressure plate and 6 puck clutch? So besides turning down the outside of the clutch the pressure plate just bolts up to that right?
I'm not too keen on my 9" dog dish flywheel w/ standard 740 turbo pressure plate and 6 puck. Doesn't hold all that much torque and this seems like a good solution.
Sorry for the many questions, but can a 765 pressure plate be fitted to a redblock flat flywheel aka 8.5" flywheel?