• Hello Guest, welcome to the initial stages of our new platform!
    You can find some additional information about where we are in the process of migrating the board and setting up our new software here

    Thank you for being a part of our community!

sway bar combinations

23/21 on my 244. With cut springs and the chassis braces my dad and I made, it's a fun car. Still wanting a wheel/tire upgrade. Too wobbly on the 14" steelies and mushy Michelin all seasons
 
On my wagon with fresh stock suspension and factory replacement lesjofors springs (wagon rear, stiffer front), the 23/19mm combo has really hit the sweet spot where the rear end will stay planted over uneven roads such as turning onto a road with a sudden elevation drop, but still stiff enough to make the handling a lot of fun.
 
25/0, 200hp 240 wagon, track car, Ben at all 4 corners. Ramp LSD, 550/350 springs, lots of front camber.

Have a 25mm rear sitting on the shelf somewhere (NorCal) that I can't see us ever using. Start your bidding, gents. 8)
 
92 245, DD status, work vehicle. No LSD. shortened housings, stiffer springs, the workz
What springs?

Jeez, how can you suck at helping people set up their suspension so much?! :-P

Seriously though, you can do better!
 
Back
Top