View Single Post
Old 12-08-2008, 08:26 PM   #32
JR-66
Board Member
 
Join Date: Oct 2003
Location: Finland
Default

Quote:
Originally Posted by Homer View Post
Now we just need one for the fuel ecu, e85 ahoy!
Its easy, bought 27C512 chip, program it with two different bins, twist pin number one so that it wont go to socket, put wire on it, cut the wire in half, connect wires to a simple switch, put the other end of the wire in the socket pin number one. When switch is of first part of the chip is used and when its on the other part is used, simple, isn't it.

Best would be if additional socket is added, do the mod in it.

Of course it would be possible to do daughter card for like two or four chips, just some jumpers on the board and run...

Sorry for my poor English skils...
__________________
Turbopower
JR-66 is offline   Reply With Quote