View Single Post
Old 03-27-2011, 01:28 PM   #104
Board Member
Join Date: Nov 2002
Location: lincoln UK

go look at a fiat twin cam ......

im pretty sure you would only need to setup on old buckets /shims , measure twice , order once .

ive also seen buckets machined down to spec with longer valves .

H section lash caps that have little button shims .

while this may be a wild guess that parner sells cams that need a big diameter tappet, he must have according buckets in the correct increments . or at least he used too , altho he is a dirty word too now....

muhahhahahhhahhaha !!!!!!!!!!!!!!!!!
volvorsport is offline   Reply With Quote