2turbotoys
Salaminizer
- Joined
- Nov 13, 2007
- Location
- Reading pa
I got a different intake manifold (so I can shut my hood) that uses a 4 bolt throttle body, up to 105mm. The ecu and wiring are set up for drive by wire. I can't reuse my current 78mm throttle body without an adapter, and why not get a bigger one...
My question is do they all need ecu tuning? A bunch of the ones I looked at say they need tuning, but some do not say that.
The manifold is a Holley Lo-Ram.
https://www.holley.com/products/intakes/efi_manifolds/parts/300-621
My question is do they all need ecu tuning? A bunch of the ones I looked at say they need tuning, but some do not say that.
The manifold is a Holley Lo-Ram.
https://www.holley.com/products/intakes/efi_manifolds/parts/300-621