![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
#2826 |
Aero challenged
Join Date: Sep 2008
Location: Vancouver, WA
|
![]() Nothing wrong with a bit of trial and error when it comes to personal preference. Harald runs 400's on the nose of his 242! I'm pleased with the ride on my wagon. They say that the rear end of the 245 is bit heavier than a sedan. Don't know.
__________________
![]() @PDXvolvo on IG |
![]() |
![]() |
![]() |
#2827 |
Prius Owner
![]() Join Date: Jul 2008
Location: Dallas, TX
|
![]() I had gaz on the rears but it just felt like it was crashing and hitting so hard on the rears over bumps or humps in roads on residentials. On the softest setting or the hardest it just never felt right. Ive been tempted to try some billy HD's in the rear cause I remember those felt really good on chopped stock springs back in the day.
__________________
93 245 LS Engine Swap Project |
![]() |
![]() |
![]() |
#2828 | |
Hurlurd?Harland?Bueller?
![]() Join Date: May 2007
Location: PDX
|
![]() Quote:
Maybe specced wrong? My Gazs are smoother than billy HDs with IPD springs. |
|
![]() |
![]() |
![]() |
#2829 |
Prius Owner
![]() Join Date: Jul 2008
Location: Dallas, TX
|
![]() Who knows. I have no idea what I did with the paper work that came with them. I'll probably throw them on again. I might even drop to a 125lb spring in the back. Im just like bla at this point.
|
![]() |
![]() |
![]() |
#2830 |
Aero challenged
Join Date: Sep 2008
Location: Vancouver, WA
|
![]() She's a beautiful wagon. What wheels and tires are those?
|
![]() |
![]() |
![]() |
#2831 |
Prius Owner
![]() Join Date: Jul 2008
Location: Dallas, TX
|
![]() |
![]() |
![]() |
![]() |
#2832 |
Aero challenged
Join Date: Sep 2008
Location: Vancouver, WA
|
![]() |
![]() |
![]() |
![]() |
#2833 |
Prius Owner
![]() Join Date: Jul 2008
Location: Dallas, TX
|
![]() |
![]() |
![]() |
![]() |
#2834 |
Aero challenged
Join Date: Sep 2008
Location: Vancouver, WA
|
![]() If you were me, what would you do next with the DL? Its actually a decent car now. In my mind next steps are expensive and only moderately interesting (more turbo, modern efi and a stronger transmission).
Call it "done" and drive it twice a month? A lot of my frustration is the covid car show ban. But even without that, I used tinker with the car every night and I miss that. Perhaps it's time to move on. |
![]() |
![]() |
![]() |
#2835 |
Hurlurd?Harland?Bueller?
![]() Join Date: May 2007
Location: PDX
|
![]() Get a welder and learn to make brackets
|
![]() |
![]() |
![]() |
#2837 |
Hurlurd?Harland?Bueller?
![]() Join Date: May 2007
Location: PDX
|
![]() Oh yeah you should definitely invest in painting tools so I can mooch off your equipment and expertise later on
![]() |
![]() |
![]() |
![]() |
#2838 | |
Aero challenged
Join Date: Sep 2008
Location: Vancouver, WA
|
![]() Quote:
I painted my parents LeSabre and G20 window van in the driveway 100 years ago. Did my Firebird while working in a body shop as gopher. All of them where a ton of work. All of them looked way better when done. It’s a real skill. Takes a ton on patience. Maybe I could take some classes at the junior college. |
|
![]() |
![]() |
![]() |
#2839 |
Board Member
Join Date: Mar 2011
|
![]() You don’t need classes. Just do it.
|
![]() |
![]() |
![]() |
#2840 |
Hurlurd?Harland?Bueller?
![]() Join Date: May 2007
Location: PDX
|
![]() |
![]() |
![]() |
![]() |
#2841 |
Aero challenged
Join Date: Sep 2008
Location: Vancouver, WA
|
![]() I may still have my old Binks siphon gun around here someplace.
Back when I had "game." ![]() Last edited by LC4CARL; 06-14-2020 at 10:59 PM.. |
![]() |
![]() |
![]() |
#2842 | |
Board Member
Join Date: Jun 2011
Location: Salem, OR
|
![]() Quote:
Happy help spin wrenches if you want. My car is at my buddies up in Spokane so I'm kind of jonsing to wrench! Also we can pull your motor and pressure wash the engine bay, you know..for fun;) |
|
![]() |
![]() |
![]() |
#2843 |
Board Member
Join Date: Jun 2011
Location: Salem, OR
|
![]() |
![]() |
![]() |
![]() |
#2844 | |
Aero challenged
Join Date: Sep 2008
Location: Vancouver, WA
|
![]() Quote:
Wow! I remember those. I really do need to fix the GD oil leak (s). Making a mess of the new garage floor. While it's out I think I'll upgrade the turbo and T5. Probably should redo the wire harness for the EFI. And paint the engine compartment too. May as well upgrade the clutch while I'm at it. And I always wanted one of those fancy intercoolers. Oh heck, 2.1 isn't enough. I should get a newer 2.3... ![]() ![]() In all seriousness. Perhaps that is just what I do. Take it off the road for 6-12 months and work my way through the engine and trans. Dunno. "Good money after bad?" Without a doubt. But it would give me a hobby again. LS / T5 swap for $5k-ish? 8V turbo Redblock / T5 for ?? Or just fix the leaks and enjoy a "sporty" wagon. Last edited by LC4CARL; 06-15-2020 at 08:09 PM.. |
|
![]() |
![]() |
![]() |
#2845 |
Board Member
Join Date: Jun 2011
Location: Salem, OR
|
![]() Focus on the leaks, fix those like you know you should have, you're so close. Clean the bay and block with a pressure washer, clean the subframe. 15g turbo is good, move over to LH2.4 so you have some flexibility in the future. T5 is easy, custom driveshaft is a couple hundred bucks, clutch from Yoshi, flywheel from STS. Make sure you get a bellhousing that can mount the hall sensor. Those changes will transform the car completely!
|
![]() |
![]() |
![]() |
#2846 |
Aero challenged
Join Date: Sep 2008
Location: Vancouver, WA
|
![]() Thanks boss.
Chicks dig Fuch's... ![]() |
![]() |
![]() |
![]() |
#2847 |
Board Member
Join Date: Jun 2011
Location: Salem, OR
|
![]() Love that pic and I miss my car!
Chick dig Gotti wheels, get those! 225/45r15 tires start at $125 for high performance summer meats |
![]() |
![]() |
![]() |
#2848 |
Aero challenged
Join Date: Sep 2008
Location: Vancouver, WA
|
![]() Fun with cameras.
![]() ![]() ![]() ![]() |
![]() |
![]() |
![]() |
#2849 |
Aero challenged
Join Date: Sep 2008
Location: Vancouver, WA
|
![]() If you wanted a "modern" EFI set up, for +/- 250 WHP power, what system would you recommend?
|
![]() |
![]() |
![]() |
#2850 |
Hurlurd?Harland?Bueller?
![]() Join Date: May 2007
Location: PDX
|
![]() Usquirt
|
![]() |
![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|