• Hello Guest, welcome to the initial stages of our new platform!
    You can find some additional information about where we are in the process of migrating the board and setting up our new software here

    Thank you for being a part of our community!

240 Front ABS Sensor Pictures

t8fanning

8v are still cool, right?
Joined
Oct 10, 2010
Location
Vancouver, WA
Could some of you post pictures of your 240's front ABS sensor installed on the car? I can't really find what I'm looking for online and there aren't any 240s in any yard near me. I'd love to see it both from the front and back. I'm most interested in sensor orientation and distance from the tone ring. But I'm also curious about wire routing. Thanks.
 
They're kinda buried under the backing plates and dust shields on a stock car.

Here's the only shot I have of that area on my '92:
https://photos.google.com/album/AF1.../AF1QipPngOMOfc7DrBE-MfykS0SPn4bFZoOXAJfQjr3b

I'm installing coilovers in the next week or so. They weren't intended to be used on an ABS car, so I had to retrofit sensor mounts:
https://photos.google.com/album/AF1.../AF1QipOEaC-jX6-opWOOuLtaijyxPNTGEUB4DN5nQZwA
https://photos.google.com/album/AF1.../AF1QipMOiu2PTEWeD-bHxgoNGcG530oSc0-rUDDCz9k5

The second photo gives you a better view of the sensor orientation. The sharper section of the diamond points toward the tone ring. I don't remember what the exact spacing is, but I set mine around 2mm iirc.
 
Thanks Karl. But for some reason those links aren't working for me.

I am also trying to retrofit sensor mounts, but for traction control instead of ABS.
 
Back
Top