VB242
I.M. Weasel
- Joined
- Sep 21, 2011
- Location
- Driving the No Malarkey Bus
I'm getting some boost spikes up to 20psi. I reclocked it and set the preload at about 3/4 of the length of the hole on the waste gate actuator rod. I took my mbc apart and didn't see anything unusual. 2 balls and a spring, I have it set so that it opens when I blow in it so it's not 20psi. Pretty sure it's hooked up right, hose on the bottom goes to the turbo outlet and the one on the side goes to WG actuator. Anyway any ideas?