home register FAQ memberlist calendar

Go Back   Turbobricks Forums > Mechanical > performance & modifications

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 11-17-2019, 12:21 PM   #1
oemoilleaks
Board Member
 
oemoilleaks's Avatar
 
Join Date: Mar 2017
Location: SoCAL
Default s10 shocks bushing question

I have been chasing a clunk in my rear suspension for over a year now.

I think I've narrowed it down to the s10 shocks I have in the rear (Bilstein 24-014120).
I remember that I had to use smaller hardware and grind down the metal eyelet a bit when I installed them and I think the clunk is coming from the smaller hardware.

My plan was to see if I could put in some proper 140 poly bushings into the shocks and use the correct hardware. I know the eye on the s10 shocks is 12.9mm.

Does anyone know the OD and ID of the 140 lower bushing?
__________________
I have no idea what I'm doing.
oemoilleaks is offline   Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -4. The time now is 09:15 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2020, vBulletin Solutions Inc.