I've seen a few decades old threads about using spacers on the front swaybar bracket to clear oil pans on swapped cars. I was wounding if anyone still uses this setup and if so any recommendations as far as making them or buying an existing product. Only option I see is buying some aluminum and drilling some holes but If an existing product works why not avoid the hassle.
This is the type of thing i'm thinking of:
<a href="https://ibb.co/sg5cccg"><img src="https://i.ibb.co/nw3444w/9-BB024-C0-B234-4-DE3-8901-18650-FD92-DCE.jpg" alt="9-BB024-C0-B234-4-DE3-8901-18650-FD92-DCE" border="0"></a>
And a link to a some summit racing set
https://www.summitracing.com/parts/...KO2Y-bTepk_sXHFzFED9u_0MuEuQP9PxoCLRsQAvD_BwE
This is the type of thing i'm thinking of:
<a href="https://ibb.co/sg5cccg"><img src="https://i.ibb.co/nw3444w/9-BB024-C0-B234-4-DE3-8901-18650-FD92-DCE.jpg" alt="9-BB024-C0-B234-4-DE3-8901-18650-FD92-DCE" border="0"></a>
And a link to a some summit racing set
https://www.summitracing.com/parts/...KO2Y-bTepk_sXHFzFED9u_0MuEuQP9PxoCLRsQAvD_BwE