- Joined
- Jul 30, 2002
- Location
- Rockville, MD
15mm would work too.
Hello Guest, welcome to the initial stages of our new platform!
You can find some additional information about where we are in the process of migrating the board and setting up our new software here
Thank you for being a part of our community!
And how did you solve this? Adjust the calipers? Or add the spacer.
15mm would work too.
I bought 5mm spacers. Then sold the wheels and spacers to KLR142
I would imagine as Redwood suggested 3mm working. He knows.
But not with stock studs.
5mm spacers on stock studs with alloys is pushing the limit of proper thread engagement.
Yes I've run the 15 spoke 780 wheels on a late 240 [vented calipers] with those 3mm spacers I linked to.
But not with stock studs.