|
|
|
 |
 |
 |
 |
 |
 |
 |
 |
03-21-2015, 02:16 PM
|
#1 | |
|
fige=500Dollar Mistake
 
Join Date: Jan 2006
Location: Southern Maryland
|
Experience with the crank scrapers for redblocks?
Searching came up with a few that had installed the metal ones, but I'm most interested in the Teflon ones.
__________________
Quote:
93 245 - Kaplhenke Shortened coilovers with adjustable Koni Reds, adjustable rear spring perches with revalved bilstein S-10 shocks. Turbo 2.5 motor in the works. 10 v50 - Unobtainium T5 R-Design AWD M66 |
|
|
|
|
03-21-2015, 03:28 PM
|
#2 |
|
Vintage anti-ricer
Join Date: Oct 2004
Location: Somewhere in a northern California smog bank
|
The pics of the b230 on his site are actually the motor in my wagon. Minor trimming as he mentions but nothing bad. Took me 30 minutes with a dremel to have it ready to go. No experience with the Teflon ones though.
__________________
RIP Doug Williams "Mr. Doug" 4/15/2009 Pete Fluitman "fivehundred" 7/14/2013 Mick Starkey "TrickMick" 1/10/14 Mark Baldwin "blue850t5" 7/19/18 Nick Fengler "fengler" 8/6/18 Thomas Fritz "stealthfti" 10/11/18 74 144 B20 http://forums.turbobricks.com/showthread.php?t=224983 90 745Ti http://forums.turbobricks.com/showthread.php?t=334698 If you need Superpro bushings PM me for price and availability! |
|
|
|
|
03-23-2015, 01:23 PM
|
#3 |
|
Newbie
Join Date: Feb 2009
Location: The Pitt, 15147
|
Same company or different company?
__________________
'93 944 T - #TrophyVo '00 XC70 SE - Slow '11 XC90 V8 - Torque Monster |
|
|
|
|
03-23-2015, 02:31 PM
|
#4 |
|
Vintage anti-ricer
Join Date: Oct 2004
Location: Somewhere in a northern California smog bank
|
I think there is only one company doing them for the redblocks.
http://www.crank-scrapers.com/Volvo.html |
|
|
|
|
03-23-2015, 02:58 PM
|
#5 | |
|
Arthur Digby Sellers
Join Date: Mar 2011
Location: Rancho Relaxo
|
At those prices why not just go with a dry sump setup?
__________________
Quote:
|
|
|
|
|
|
03-23-2015, 03:14 PM
|
#6 | |
|
Newbie
Join Date: Feb 2009
Location: The Pitt, 15147
|
Quote:
|
|
|
|
|
|
03-30-2015, 10:18 AM
|
#7 |
|
fige=500Dollar Mistake
Join Date: Jan 2006
Location: Southern Maryland
|
Whelp,
I bought the teflon one. Should be in within the next few weeks.  |
|
|
|
|
03-30-2015, 10:35 AM
|
#8 |
|
Board Member
Join Date: Apr 2009
Location: North Alabama
|
Following this.
|
|
|
|
|
03-30-2015, 11:09 AM
|
#9 |
|
Mere Drab Mob
Join Date: Jun 2010
Location: Port Moody, BC
|
I installed a teflon one last weekend.
Installed easy. Just a little teflon trimming with a blade. Went on a new motor as part of a swap, so I can't speak to what kind of improvements it gives. Claimed 1-2%, not bad if true. It should help keep the oil in the pan on hard corners also. I've had the thing on a shelf for a year and a half. I ordered it in fall 2012, it took almost exactly a year to arrive. I had pretty much written it off when it showed up unexpectedly. I'm not sure if they stock them, or make them to order. It kind of looked like they hand cut them with a plasma cutter and a template. 
__________________
I have a Volvo with some half-done, homemade crap in it. http://forums.turbobricks.com/showthread.php?t=244534 |
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
