• Hello Guest, welcome to the initial stages of our new platform!
    You can find some additional information about where we are in the process of migrating the board and setting up our new software here

    Thank you for being a part of our community!

Putting S60R front brakes on a 940

940T4R

New member
Joined
May 5, 2020
Hello,

I need bigger brakes of my brick but the S60R don't fit with all wheel.

I have MK18 8.5x18 ET06 with 215/35 I go to 225/35 and I don't want up the car I like the level

A priori with the S60R calipers and MK18 wheels I need 20mm spacers but I don't want to pull the fenders, cut them inside ok but I'm afraid it won't work.
I would like to keep the current height of the car even if I have to load rims but in this case which 8.5x18 or 17" fit with the S60R calipers ?

 
Last edited:
Back in late 2003, early 2004 when I was working on adding these to my 240, Travis Kijowski of Strictly Volvo Racing (SVR) in Maryland developed the first set of adapters. He had a 940, so he adapted a set of 240 front strut tubes to his 940 to make them work. Pretty sure some of his work must have been posted in discussions here. His brother Todd was 'tenacious todd' here on TB.
Some deep searching might find info.
Dave B
 
Back
Top