BeaverMeat
Active member
- Joined
- Aug 8, 2020
- Location
- Vancouver Island
Got the car up on the hoist to see what was causing drivetrain vibration. It appears the drive line isn't straight. Essentially it's an upside down V shape.
From the back of the T-5 it goes upward slightly to the center support.
Do I just shim the mount to raise the rear of the transmission so the prop shaft is straight?
Here’s a crappy picture
From the back of the T-5 it goes upward slightly to the center support.
Do I just shim the mount to raise the rear of the transmission so the prop shaft is straight?
Here’s a crappy picture