• Hello Guest, welcome to the initial stages of our new platform!
    You can find some additional information about where we are in the process of migrating the board and setting up our new software here

    Thank you for being a part of our community!

Best sounding muffler (2012 fartcan bump)

3 inch turbo back, dummy cat no mufflers
<iframe width="560" height="315" src="http://www.youtube.com/embed/OG-8bdVRk0w" frameborder="0" allowfullscreen></iframe>
3inch turbo back, dummy cat, magnaflow 14inch resonator
<iframe width="420" height="315" src="http://www.youtube.com/embed/ofMClxamoWw" frameborder="0" allowfullscreen></iframe>


complete the exhaust system all the way out the back, no stupid side exit and you'll be stoked at how little muffler you actually need
 
Nobody mentioned SpinTech yet?
I'd suggest this one: 6000-pro-street-series


spintech-4.jpg
 
falunbrick said:
3 inch turbo back, dummy cat no mufflers
<iframe width="560" height="315" src="http://www.youtube.com/embed/OG-8bdVRk0w" frameborder="0" allowfullscreen></iframe>
3inch turbo back, dummy cat, magnaflow 14inch resonator
<iframe width="420" height="315" src="http://www.youtube.com/embed/ofMClxamoWw" frameborder="0" allowfullscreen></iframe>


complete the exhaust system all the way out the back, no stupid side exit and you'll be stoked at how little muffler you actually need
Click to expand...
that sounds awesome. makes me think about replacing my glasspack with a section of 3" straight pipe.

I have a glasspack on a 3" straight-through side-exit, but I would definitely do a full-length if I were to do it again. The extra length of a full length system seems to smooth out the exhaust pulses a bit, making it sound less... erm, agricultural than something like a side-exit. at least that's how I see it. My glasspacked 3" sounds nice at idle, but other than that it's nothing special - IMO at least.
 
falunbrick said:
3inch turbo back, dummy cat, magnaflow 14inch resonator
<iframe width="420" height="315" src="http://www.youtube.com/embed/ofMClxamoWw" frameborder="0" allowfullscreen></iframe>


complete the exhaust system all the way out the back, no stupid side exit and you'll be stoked at how little muffler you actually need
Click to expand...
What turbo did you have when that video was taken?
 
Shel155 said:
I can't believe how mellow some of these magnaflow's sound, I put one on a 7 series BMW and it sounded like I was running an uncapped header, apparently there are vast differences between the models.
Click to expand...

last time I checked, a 7 series didn't come with a turbo (older ones) ...no comparison between an n/a and turbo car when it comes to mufflers...
 
falunbrick said:
3 inch turbo back, dummy cat no mufflers
<iframe width="560" height="315" src="http://www.youtube.com/embed/OG-8bdVRk0w" frameborder="0" allowfullscreen></iframe>
3inch turbo back, dummy cat, magnaflow 14inch resonator
<iframe width="420" height="315" src="http://www.youtube.com/embed/ofMClxamoWw" frameborder="0" allowfullscreen></iframe>


complete the exhaust system all the way out the back, no stupid side exit and you'll be stoked at how little muffler you actually need
Click to expand...

Definitely like the straight piped sound. But when I finally throw my he 341 on I will be running a 4" dp as well and then I might want a resonator like yours or maybe even a muffler. What does your sound like now with the 4" dp?
 
For the money & longevity, and decent sound(not too quiet/not too loud) I say magnaFlow straight through muffler.

I'm running two on my n/a 240.
 
Here's my setup. Minus turbo though :(

<iframe width="560" height="315" src="http://www.youtube.com/embed/fWiwHimrp0k?rel=0" frameborder="0" allowfullscreen></iframe>

Sounds like poop. Angers the neighbors. Makes me grin.

It's basically stock 2.25" header back w/cat + modified glass-pack w/3" stainless tip or might be 2.5". I got bored and started cutting lol.

First clip is the same setup with a cheap-o turbo muffler that was on when I got it.
 
Last edited:
magnaflow

anyone have a model number for the right magnaflow ,I have a 3 " downpipe and gonna go 3 inch all the way so as best I can tel an 18' magnaflow w3 ' center in/out will do the trick , anyone have any other suggestions /
 
You must log in or register to reply here.
Back
Top