Big 16g

Hello all I am looking to upgrade my turbo to a 16g. I was wondering would anyone know the steps needed to make it fit and work. I want to rebuild the turbo to make sure that everything is clean and new. I have a 92 740 turbo. Doing research I am seeing that the exhaust manifold is different for the 90+. If anyone can lead me to a write up or video that would be great.

So looking at the write up he took the turbo apart and put it back together. Would that work for either of these https://ibb.co/3dQjnPZ
https://ibb.co/7R0wk5V or do I have to get the td05 housing. I am new to this so I am learning. Sorry for the questions

If you have a TD04HL-16T then do as in my link. Those turbos came in later FWD cars (V70's).

I don't know the TD05 to say if it's the same. I don't think Volvos came with a TD05.

16G or 16T?

You'll want a 3" dp for a 16g. Just make sure it's a T3 flange oriented in the correct direction. You'll have to machine the manifold flat too. Then fab an oil drain hose and adapt the oil inlet.