home register FAQ memberlist calendar

Go Back   Turbobricks Forums > Mechanical > performance & modifications

Reply
 
Thread Tools Display Modes
Old 08-18-2019, 11:19 AM   #851
doleary
Board Member
 
Join Date: Oct 2016
Location: Mass
Default

John sent you a pm, when your all set with the kit i would love to get it.
doleary is offline   Reply With Quote
Old 08-20-2019, 08:39 PM   #852
doleary
Board Member
 
Join Date: Oct 2016
Location: Mass
Default

I assume by your lack of response (John V) that this is no longer available, if something changes please let me know.
doleary is offline   Reply With Quote
Old 08-20-2019, 08:53 PM   #853
white855T
Board Member
 
Join Date: Sep 2013
Location: Dallas,TX
Default

Quote:
Originally Posted by doleary View Post
i assume by your lack of response (john v) that this is no longer available, if something changes please let me know.
--> call (206) 431-9696<----
white855T is offline   Reply With Quote
Old 08-21-2019, 04:56 AM   #854
doleary
Board Member
 
Join Date: Oct 2016
Location: Mass
Default

Thanks for the tip, I'll give it a try
doleary is offline   Reply With Quote
Old 08-31-2019, 04:50 AM   #855
TurboDutch
Board Member
 
Join Date: Aug 2019
Location: Nieuw en Sint Joosland
Default

I'd also like to have it can I go after you doleary?
TurboDutch is offline   Reply With Quote
Old 02-16-2020, 08:17 PM   #856
B-RAD
Newbie
 
Join Date: Dec 2018
Location: Eugene, OR
Default

I’d like to get on the list for this as well. I sent a pm as well as called but voicemail was full.

Last edited by B-RAD; 02-17-2020 at 02:15 PM..
B-RAD is offline   Reply With Quote
Old 06-12-2020, 05:18 PM   #857
TurboDutch
Board Member
 
Join Date: Aug 2019
Location: Nieuw en Sint Joosland
Default

Can anyone give some details about the squirters? I would like to buy them and convert my B21 to squirter block.
TurboDutch is offline   Reply With Quote
Old 06-12-2020, 08:42 PM   #858
bobxyz
Board Member
 
bobxyz's Avatar
 
Join Date: Aug 2014
Location: Boulder CO
Default

Web search for: BMW Oil Spraying Nozzle 11111739907
bobxyz is offline   Reply With Quote
Old 06-13-2020, 05:57 AM   #859
TurboDutch
Board Member
 
Join Date: Aug 2019
Location: Nieuw en Sint Joosland
Default

Yeah thanks I also found it last night on page 6 or 7 sometin.


furthermore we needs;

- BMW Oil Spraying Nozzle 11111739907
- Tap metric fine M8x1,0
- 200mm long 7mm diameter drill.
- Spot facer with 7mm pilot
- Some loctite thread sealer.

did I miss anything?

http://forums.turbobricks.com/showpo...&postcount=566

Above link for proper discription of use

Last edited by TurboDutch; 06-13-2020 at 06:27 PM..
TurboDutch is offline   Reply With Quote
Old 06-14-2020, 04:00 PM   #860
bobxyz
Board Member
 
bobxyz's Avatar
 
Join Date: Aug 2014
Location: Boulder CO
Default

^^^ post 566 is the same one I have bookmarked for latest instructions. Post 639 shows a recent, or maybe latest?, kit.

If you look at the squirter parts carefully, you'll find that there's a tiny little spring and ball valve in the squirter bolt. I assume this cuts off the squirters until there's good oil pressure.

A couple suggestions:
- find a picture, or temporarily install the crank, to figure out which side of each cylinder to machine. One side has good crank clearance to the squirter, the other side looks very tight (maybe unusable?). The side varies by cyl.

- I found it better to drill the initial hole with a 1/8", or maybe a 3/16" drill. It was much easier to see where the hole was going to align it on the center of the oil galley. Enlarging it with the final drill was then quick and accurate.
bobxyz is offline   Reply With Quote
Old 06-14-2020, 04:38 PM   #861
TurboDutch
Board Member
 
Join Date: Aug 2019
Location: Nieuw en Sint Joosland
Default

Before drilling you normally always punch a center point so you can accurately drill the hole.

I was thinking to have a surfacing tool with 7mm pilot so that you only need to drill once instead of several different sizes.
TurboDutch is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -4. The time now is 03:31 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2020, vBulletin Solutions Inc.