home register FAQ memberlist calendar

Go Back   Turbobricks Forums > Mechanical > performance & modifications

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 09-18-2020, 01:17 PM   #1
DNAsEqUeNcE
†John3:16
 
DNAsEqUeNcE's Avatar
 
Join Date: Jan 2009
Location: Dallas
Default Let's talk about the P3 B6304T4 engine

Howdy all,

I am shopping around for an engine to put in the 244 and I am interested in this engine. The bellhousing pattern, Crankshaft bolt pattern, and starter placement are the same as the whiteblock. The obvious difference is that all of the accessories are driven at the back of the engine. Obviously this is less than ideal. Before potentially blowing a band on an engine for testing purposes, I figured i would ask around beforehand to see if anyone has sought to or successfully remedied this situation by relocating the drive and the accessories to the "front" of the engine. At a very minimum, I only require the alternator and perhaps an AC compressor.
__________________
DNAsEqUeNcE is offline   Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -4. The time now is 07:49 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2020, vBulletin Solutions Inc.