fatcatbestcat
Professional Hack
- Joined
- Oct 1, 2019
- Location
- Mississauga, ON (Canada)
Hi all,
Anyone following my build thread will know that I have enough problems pertaining to my engine... I think I'm at the point where it's going to have to come out to make any further progress.
This would be my first time pulling an engine from a car, and I wanted to know if anyone had any useful tips. I suppose now would be time to ask my four biggest questions on the subject.
I expect to be asking a bunch of dumb questions as usual, so bear with me.
Thanks again.
Anyone following my build thread will know that I have enough problems pertaining to my engine... I think I'm at the point where it's going to have to come out to make any further progress.
This would be my first time pulling an engine from a car, and I wanted to know if anyone had any useful tips. I suppose now would be time to ask my four biggest questions on the subject.
- Roughly how much does a B20 weigh?
- Should I be removing the front valence to do this?
- Is it possible to remove only the engine, leaving my M41 in place?
- I'm getting a lot of conflicting info on whether or not I need to remove the intake/exhaust manifolds to pull it out... it'd be great if someone could clear it up for me.
I expect to be asking a bunch of dumb questions as usual, so bear with me.
Thanks again.