VB242
I.M. Weasel
- Joined
- Sep 21, 2011
- Location
- Driving the No Malarkey Bus
So I can't get the timing set by moving the distributor, or by pulling the distributor out and changing the tooth either. I'm guessing it's a tooth off on the belt. I'm using a lh2.2 distributor and the 4 slot rotor wheel for a trigger. With it one way I can't get the timing lower than 20 degrees and if I pull the distributor and move it a tooth I can't get more than 5 degrees. If I want to retard the timing from the higher tooth do I change the trigger angle higher say to 63.4 from 53.4 or do I set it lower to 43.4?