oemoilleaks
Member
- Joined
- Mar 26, 2017
- Location
- SoCAL
I have been chasing a clunk in my rear suspension for over a year now.
I think I've narrowed it down to the s10 shocks I have in the rear (Bilstein 24-014120).
I remember that I had to use smaller hardware and grind down the metal eyelet a bit when I installed them and I think the clunk is coming from the smaller hardware.
My plan was to see if I could put in some proper 140 poly bushings into the shocks and use the correct hardware. I know the eye on the s10 shocks is 12.9mm.
Does anyone know the OD and ID of the 140 lower bushing?
I think I've narrowed it down to the s10 shocks I have in the rear (Bilstein 24-014120).
I remember that I had to use smaller hardware and grind down the metal eyelet a bit when I installed them and I think the clunk is coming from the smaller hardware.
My plan was to see if I could put in some proper 140 poly bushings into the shocks and use the correct hardware. I know the eye on the s10 shocks is 12.9mm.
Does anyone know the OD and ID of the 140 lower bushing?