Mr.Borrie
The Sneaky F*ing Ukrainian
- Joined
- Aug 1, 2006
- Location
- Netherlands
Busy with some hoses and I am stuck with what adapter I need to get to connect the OEM line to my AFPR
Photo:
Photo:
Last edited:
Hello Guest, welcome to the initial stages of our new platform!
You can find some additional information about where we are in the process of migrating the board and setting up our new software here
Thank you for being a part of our community!
I added photos?
Anyway it’s an lh2.4 connection that goes on the fuel rail OEM
That now goes to a FPR, also in the photo.. sucks they don’t show?
Color me stupid but I don't understand how putting the FPR before the rail will maintain pressure in the rail. Won't the pressure just drop off past the FPR since there's nothing to keep the fuel from returning to the tank?
A hydraulic hose shop can solder on -6 AN fitting to the feed and return side of the rail for cheap.
Or you can get a Bosch FPR to AN adapter, but they're about $125.
Are you dead heading the fuel rail, or running a return type? That will dictate plumbing needs.
Was just looking for something else in my bookmarks & I came across this -
https://www.jegs.com/i/Earls/361/9894DBH/10002/-1
I'm pretty sure that fits on the fuel rail where you showed in your photo.
I'd bookmarked this from a similar thread some time ago so the details are pretty fuzzy - perhaps someone else can remember?
Tim