Jussi Alanko
Member
- Joined
- Jun 5, 2020
- Location
- Finland
I finally found a cam card, and i put the values to summit racing camshaft calculator, and this is what i found out:
Camshaft is designed to work with my head, but overlap seems to be huge, cam is designed for turbo use.
Does this work ok with this kind of overlap.
I have a holset super hx40 with 18# exhaust housing, which is biggest that you can get. I also use a good tubular exhaust manifold and i only put something about 23-25psi of boost, so i think that i have more boost than backpressure.
Do i worry too much which this overlap thing?
Camshaft is designed to work with my head, but overlap seems to be huge, cam is designed for turbo use.
Does this work ok with this kind of overlap.
I have a holset super hx40 with 18# exhaust housing, which is biggest that you can get. I also use a good tubular exhaust manifold and i only put something about 23-25psi of boost, so i think that i have more boost than backpressure.
Do i worry too much which this overlap thing?