Jussi Alanko
Member
- Joined
- Jun 5, 2020
- Location
- Finland
I have a china made 50mm wastegate now, it's 50mm, but i'm thinking to update this piece of crap to something more serious.
I have a good price at Tial's MV-S 38mm wastegate in Finland at Kkd-motorsport, there Tial 38mm wastegate only costs about 300€.
But is it large enough to my combination, i have a exhaust manifold like this:
[/url][/IMG]
It have a 40mm tube which leads to waste gate, i split the wastegate tube to two halfs, so then twin scroll manifold works at it's best.
But is 38mm wastegate big enough to my combination which contains: b21 block bored and honed, new pistons, ported 530 head which flows about 210-220 cfm, then i have a 278 at 0.050 and 12mm camshaft, Holset hx40 super with 18# exhaust housing, i'm planning to drive it about 24 psi of boost with 98e ron gasoline and a water-meth injection to increase octane rating.
I have a good price at Tial's MV-S 38mm wastegate in Finland at Kkd-motorsport, there Tial 38mm wastegate only costs about 300€.
But is it large enough to my combination, i have a exhaust manifold like this:
It have a 40mm tube which leads to waste gate, i split the wastegate tube to two halfs, so then twin scroll manifold works at it's best.
But is 38mm wastegate big enough to my combination which contains: b21 block bored and honed, new pistons, ported 530 head which flows about 210-220 cfm, then i have a 278 at 0.050 and 12mm camshaft, Holset hx40 super with 18# exhaust housing, i'm planning to drive it about 24 psi of boost with 98e ron gasoline and a water-meth injection to increase octane rating.
