Jussi Alanko
Member
- Joined
- Jun 5, 2020
- Location
- Finland
I have a static compression ratio at 8.05 this is with a modified head and dished pistons.
This is so low because i originally think i drive with a 98 ron fuel, but now i'm thinking to use e85 because i had access to it, before i had no access to it, but now i had.
How much will static cr raise if i mill 1mm off the head?
It's a b21 engine.
And can i shave the head while valves are installed?
This is so low because i originally think i drive with a 98 ron fuel, but now i'm thinking to use e85 because i had access to it, before i had no access to it, but now i had.
How much will static cr raise if i mill 1mm off the head?
It's a b21 engine.
And can i shave the head while valves are installed?