stayathomedad
New member
- Joined
- Apr 21, 2020
- Location
- Visalia California
Hello all, new to the forum and volvo engines in general but am diving right in!
I currently have a stock B230 block, 531 head with an A cam. NA set-up.
I'm going to be replacing the A cam with a V cam and have a question regarding shim and lobe clearance.
Does anyone happen to know what clearances I should be looking at between the base of the lobe and shim for this cam swap?
Thanks!
I currently have a stock B230 block, 531 head with an A cam. NA set-up.
I'm going to be replacing the A cam with a V cam and have a question regarding shim and lobe clearance.
Does anyone happen to know what clearances I should be looking at between the base of the lobe and shim for this cam swap?
Thanks!