View Single Post
Old 06-24-2020, 04:32 AM   #198
JerryJS8
der Junge
 
JerryJS8's Avatar
 
Join Date: Sep 2004
Location: Normal Saxony
Default

Spent a few hours on Saturday getting closer to the goal and it was going pretty well!





Got the underside contours almost to where they needed to be and started sanding the face to take out the bulge when I unfortunately broke through the material in a few spots. So I had to grind out the thin material and added a patch to the inside.

It's very interesting to look at the different layers that were applied here. The light brown material is the actual bumper, but do notice the gauge that was applied to the outside





At the end of the day it's looking more or less almost finished (knock on wood). I left a coat of filler primer to dry that'll take care of some air bubbles and then I just need a final sanding to restore the edges.

__________________
- 1987 244 (hand-me-down first car)
- 1990 744 (white with red leather)
- 1992 965 (green with tan leather)
- 1990 744 16v (pegleg drift can)
- 1992 480 (Renault disaster)

- 1989 745 16v
- 1991 744 (SE) 16v Turbo

Quote:
Originally Posted by nordmaschine View Post
Try to recreate and see what happens, our crystall ball servers are currrently down.
JerryJS8 is offline   Reply With Quote