View Single Post
Old 03-02-2021, 04:41 AM   #2
Board Member
Swedbrick's Avatar
Join Date: Oct 2016
Location: Netherlands, Source of Grolsch

I've ran the ipd springs with yellow Koni dampers with succes on my 745 wagon. Redblockpowered has done a suspension sheet that you should be able to find here:

It has some suggestions as to the ideal rates, the koni's are stiff compared to OEM, and therefore best matched to a higher spring rate. From memory the IPD is quoted as either 20 or 40% stiffer, so from the stock setup you should be able to calculate if your springs work. Given that I had to switch to a softer rear sway bar to make the rear hook up, I'd try the wagon springs

Just realized this is for a 240, derp haha
Volvo 745 - IPD springs, 25mm/19mm swaybars, T-cam, LH2.4, M90 swap, 3.54 \w racingdiff lsd, track/daily
I sell LH2.4 Chips for Europe!

Last edited by Swedbrick; 03-02-2021 at 04:35 PM..
Swedbrick is offline   Reply With Quote