View Single Post
Old 12-15-2007, 03:42 PM   #9
the real Towery
towerymt's Avatar
Join Date: Sep 2002
Location: VA, USA

The 240 front caliper sticks out right over the edge of the rotor hat as I recall. Does the caliper hit near the center hub of the wheel, or is it hitting the spokes further out from the center?

You could stack some washers on the studs and TEST FIT the wheel only, to see how much spacer is required. 1/4" or 5-6mm is about the limit on the stock studs, and that's pushing it. If it needs more than that, look for different wheels or longer studs with thicker spacers.
1987 244 | Project Thread | The 87 | Now with 74 mods and counting
1992 244 | The 92
Originally Posted by Poik View Post
244s are drop dead ugly and suck.
towerymt is offline   Reply With Quote