View Single Post
Old 12-13-2020, 09:31 PM   #4
Lankku
Board Member
 
Lankku's Avatar
 
Join Date: May 2015
Location: Finland
Default

Turbos fit fine as they are. The rear turbo inlet pipe needs a sharp bend and/or a bit hammering of the firewall to fit.

My old 745 with a B6254 and T6 turbos:


You have to make an adapter plate for RWD throttle body. With a simple plate TPS won't fit in the original position but turning it 180 works. Just grind the axle on the correct spot.
__________________
444 -55,
242 DL -80 (was 4.6l)sold, 245 -88 "B6284T" sold, 245 -92 "B6284T",
245 -90
Lankku is offline   Reply With Quote