home register FAQ memberlist calendar

Go Back   Turbobricks Forums > Mechanical > maintenance & nonperformance

Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 03-01-2021, 07:38 PM   #1
Board Member
spock345's Avatar
Join Date: Nov 2016
Location: Santa Cruz, CA
Default Hard warm start SU HS6

I've got the SU carburetors mostly dialed in on my B20F (now with DX needles as recommended by planetman). Now I have an issue with hot starts. It used to tick over rather quickly when I was running the SM needles but it will hesitate to get started unless at full throttle and cranking for longer. I've dialed them in and verified the mixture setting by looking at the plugs, all of them are a gray-ish tan. I'm running a heat shield.

From what I have read one of the big issues with these is heat and modern ethanol laden fuel's tendency to vaporize more easily. Is there anything off or should I just live with flooring it and cranking for a few seconds? Also is it normal for the inner two cylinders (2 and 3) to seem to run a bit richer than the outer cylinders (1 and 4)?
1967 122s, B20F, M40
1989 240 B230F (V15 cam, chipped EZK), M47 (Lost a fight with a Chevy express van)
2012 VW Tiguan 6 speed auto (oh the joys of carbon buildup).

Last edited by spock345; 03-01-2021 at 07:44 PM..
spock345 is offline   Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump

All times are GMT -4. The time now is 03:55 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.