home register FAQ memberlist calendar

Go Back   Turbobricks Forums > Mechanical > performance & modifications

Reply
 
Thread Tools Display Modes
Old 02-04-2021, 03:54 AM   #1
SkeTchy-MechAniC
Board Member
 
SkeTchy-MechAniC's Avatar
 
Join Date: Jun 2020
Default Clutch options M47+flat flywheel

Goodmorning!

The ITB car will be getting a flat flywheel and needs a clutch setup. We've got a hardly used NA setup laying about that could be used but seriously starting to doubt if it's strong enough. The car will be setup as a streetable tracktoy. 2 rearends to chose from, an open 3.5 with sticky tires for track and welded 4.1 for drifting. While drifting it would be nice to be able to clutchkick it without destroying clutches or the freshly rebuild M47 The options would be the stock NA set to save the M47, B21ET Complete set, B21ET pressure plate with sintered clutch (4puck, 6puck, Suprung, Unsprung?)

So what would you guys do, We don't really enjoy pulling trannies so getting the right the first time would be great!
__________________
Never have i ever .... Seen a 242 with two motorcycles in the back
SkeTchy-MechAniC is offline   Reply With Quote
Old 02-04-2021, 01:07 PM   #2
culberro
Ronald Culberbone III
 
culberro's Avatar
 
Join Date: Feb 2010
Location: Portland, OR
Default

Pick your fuse: Clutch or transmission


My vote is stock NA setup or an organic disk with a higher clamp PP.
__________________
Cult Person. Pissing in your Kool-Aid.
culberro is online now   Reply With Quote
Old 02-05-2021, 07:45 AM   #3
Swedbrick
Board Member
 
Swedbrick's Avatar
 
Join Date: Oct 2016
Location: Netherlands, Source of Grolsch
Default

I currently am running the diesel plate with the higher pressure Sachs, it's rated to roughly 440nm as a fuse for my m90. It requires a bit of a leg workout but it's very streetable

For the m47 I'd opt for a turbo pp setup, should be plenty. Sinter plates eat transmissions I understood from my dad when he raced (1.8L klasse crosskevers)
__________________
Volvo 745 - IPD springs, 25mm/19mm swaybars, T-cam, LH2.4, M90 swap, 3.54 \w racingdiff lsd, track/daily
---------------------------------
I sell LH2.4 Chips for Europe!
Swedbrick is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -4. The time now is 10:56 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.