fatcatbestcat
Professional Hack
- Joined
- Oct 1, 2019
- Location
- Mississauga, ON (Canada)
As the title suggests, I'm trying to figure out what has to be done to make my aftermarket seats fit in my car. I'm not at the point of doing that yet, since I still have to cut the old floors out and replace the carpet and whatnot, but I'm trying to figure out what rails to buy.
The PN is 90010PR, if that helps.
This is probably going to be a street-driven car, so I'm not so sure about direct-mounting them to the floor like a hot boi.
The PN is 90010PR, if that helps.
This is probably going to be a street-driven car, so I'm not so sure about direct-mounting them to the floor like a hot boi.