Stiggy Pop
In the cool kids club
- Joined
- Feb 27, 2011
- Location
- Granville, MA
if you get parts cut all fancy like make extras of that frame rail mount that picks up the crossmember bolts. I'd buy a set to make b230 mounts.
Hello Guest, welcome to the initial stages of our new platform!
You can find some additional information about where we are in the process of migrating the board and setting up our new software here
Thank you for being a part of our community!
if you get parts cut all fancy like make extras of that frame rail mount that picks up the crossmember bolts. I'd buy a set to make b230 mounts.
if you get parts cut all fancy like make extras of that frame rail mount that picks up the crossmember bolts. I'd buy a set to make b230 mounts.
That's tidy having the compressor way down there.
Cheers Chris! Were stoked on the addition to the family, and thankful for your taking good care of her.
Put it in a crown Vic!
Rear mounted, I assume, you mean, yes....maybe?I think it would fit rather nicely in here...
Rear mounted, I assume, you mean, yes....maybe?
How much for the 8 bolt b20?
Yeah, of course. Rear mounted, backwards behind the back seat. Driveshaft forward to a transfer case and front diff under the hood. Then another long driveshaft back to the rear diff. RS200 style. RS245!!
Actually it's been done here locally. Roof cut out and all. It was a "stubb race" car.
Tried to find a picture but I couldn't fint it.