240 Fuel pipe for conversion from K-Jet to LH2.2

[volvo740best]

Hi all!

I take all parts for convert my 240 1984 with K-Jet to LH2.2

I need to make new fuel pipe for connect fuel filter to fuel rail and for connect FPR to return fuel pipe.

I not want to cut original metal fuel pipe.

This is connection of fuel filter and return:

And this is connection on fuel rail:

There is some Volvo that have compatible pipes?

or

You can tell me what type of this connectors I need for made new pipes?

Very Thanks!

Bruno.

 

[volvo740best]

Any help for dimension of connector?

Thanks, Bruno.

 

[tjanson]

I did the K-jet to Lh 2.2 swap as well.
I used the original barbed fittings with rubber hose. Cut the plastic off them then just use regular fuel injection hose with hose clamps.

 

[volvo740best]

I did the K-jet to Lh 2.2 swap as well.
I used the original barbed fittings with rubber hose. Cut the plastic off them then just use regular fuel injection hose with hose clamps.

I use this system as last choice! Thanks!

I hope to find dimension of connector and make new pipe!

Very Thanks!

Bruno.

 

[olov]

i couldnt find anything with the same thread(what i found leaked)

good luck, use a stock part imo

 

[volvo740best]

i couldnt find anything with the same thread(what i found leaked)

good luck, use a stock part imo

Good info!!

How I can take connector from k-jet hose and press into LH hose?

Very Thanks!

Bruno.

 

[volvo740best]

I did the K-jet to Lh 2.2 swap as well.
I used the original barbed fittings with rubber hose. Cut the plastic off them then just use regular fuel injection hose with hose clamps.

I understand only now what You tell me!!

This work for You without problem?

Very Thanks!

Bruno.

 

[Mueller]

I understand only now what You tell me!!

This work for You without problem?

Very Thanks!

Bruno.

I did the same thing, just make sure you use the correct fuel injection rated hose and fuel injection hose clamps