- Joined
- Jul 30, 2002
- Location
- Rockville, MD
I use my glove box for its intended purpose. The BTM is fine where it is. I will probably build a nice bracket and get it powdercoated down the line.
just do it
Hello Guest, welcome to the initial stages of our new platform!
You can find some additional information about where we are in the process of migrating the board and setting up our new software here
Thank you for being a part of our community!
I use my glove box for its intended purpose. The BTM is fine where it is. I will probably build a nice bracket and get it powdercoated down the line.
I use my glove box for its intended purpose.
It will hold 10psi with out spinning the tires? Your 60' should be WAY better if that is correct.60': 2.54 s
ET: 15.2 s
Trap: 94.5 mph
Needs Megasquirts.
If you can't properly set up and adjust/tune LH/EZK, why in the world do you think MS is going to be easier?once I get my MS all set up
If you can't properly set up and adjust/tune LH/EZK, why in the world do you think MS is going to be easier?