Fretka
New member
- Joined
- Dec 22, 2013
Hey guys!
Title says it all - back end part (transmission side) of my B200FT is covered in oil.
PCV is clean, just checked.
Distributor, that comes on the back of camshaft is now swapped for a cap, new valve cover seal, everything is dry from now on there.
Still, having a huge leak somewhere below the head at the back of engine.
Oil is comming mostly from bellhousing and oil pan.
Blown rear main (crank) seal + oil pan gasket?
If so, is there some kind of legit DIY for these jobs?
Thanks.
Title says it all - back end part (transmission side) of my B200FT is covered in oil.
PCV is clean, just checked.
Distributor, that comes on the back of camshaft is now swapped for a cap, new valve cover seal, everything is dry from now on there.
Still, having a huge leak somewhere below the head at the back of engine.
Oil is comming mostly from bellhousing and oil pan.
Blown rear main (crank) seal + oil pan gasket?
If so, is there some kind of legit DIY for these jobs?
Thanks.