Release bearing dimensions.

[Markos Simopoulos]

Hey everyone I am getting my flat flywheel redrilled for a SR20DET pressure plate. I wanted know if anyone knows the OD of p1800 release bearing looks like this

https://www.skandix.de/en/spare-par...arts/releaser-clutch/release-bearing/1018170/

Just wanna make sure it will work before I tear everything apart.

Here is a pic for anyone who wants to try this

 

[Markos Simopoulos]

Well shucks it’ll probably be fine….

 

[Markos Simopoulos]

Whelp it was indeed too small ended up getting a custom piece made to work with the sr20det release bearing. Also the lip of the pressure plate is slightly to big for the bellhousing so machined it down a few mm and it fits in there now. but this is what you will need if you want a 240mm clutch.